The Internet Mini Encyclopædia
SSI Insert revised (no index tag!): 22-Feb-2016
A few possibilities:
If it is tail happy it could be toed out at the back. Check with the
bit of string method:
If toed out string will
touch the front edge of the tyre and not the back. Toe in will be the
- Tie to back bumper
- Run the string to the front just below sill level...
- ... and round to the back again
Cracked, or insecure subframe
Loose radius arm nut(s)... most likely the inner one
Bent radius arm.... sideswiped any kerbs lately?
The clearance isn't that great at the best of times, so
if everything checks out as OK *thin* spacers might be the solution.
Minilist share your joys and woes with 500+ mini owners worldwide
via Minilist at Yahoogroups
SSI Insert revised: 23-Feb-2016
07 June 2003